Information about SpeedScreen and Screening Complete
Because the SpeedScreen mode allows users to enter infant data during screening, it is possible
that the screening will finish while you are still entering infant data. If this occurs, the ALGO 3i
screener will display “Screening is Complete” in the Message Box of the Infant Data Window,
notifying you that the test has finished. The ALGO 3i screener will wait indefinitely for you to
complete and confirm the infant data before matching it to the screening results and saving a
screening record.
Once you click “OK”, the device will advance to the Screening Complete mode, where it will
save the screening record and display the screening results.
Printing (or Exporting) a Record Immediately after Screening
Note: To print or export a record, an ALGO 3i Printer Option or an ALGO 3i Export Option is
required.
To Next Page
Loading...
Need help?
General
