natus ALGO 3i - Page 31

V. ALGO 3i Screening Procedure
ALGO
®
3i Newborn Hearing Screener IFU 024913 RevD Revision Date 08/05/2020
31
Monitor action
The ALGO 3i screener will display a
“Printing in Progress” message.
Printing may take a few minutes.
Monitor the printer until you see the
record begin to emerge.
The ALGO 3i screener will display an
“Exporting Records” message while
exporting occurs. This will only take a few
seconds.
To cancel action
Click the “X” key
Click the “X” key
Once action is complete
After the ALGO 3i screener has sent
the record to the printer, it will display
the “Printing Complete” message and
ask you to click OK.
The ALGO 3i screener will confirm the
number of records exported. Click “OK”.
Back to DataManagement
Your record will still be selected
(“Records Now Selected: 1”)
Your record will still be selected
(“Records Now Selected: 1”)
Note: During printing, do not disturb either device or obstruct the path between the ALGO 3i screener’s IR port and the label
printer’s IR dongle. Ensure that other IR devices do not interfere with printing. Incomplete printing of screening results
or misaligned labels may result. Check the label alignment and retry printing.