ALGO
®
3i Newborn Hearing Screener IFU 024913 RevD Revision Date 08/05/2020
NOTICE: Deviations from the collateral standard were performed per IEC 60601-2-40
NOTICE: All necessary instruction for maintaining compliance with regard to EMC can be found in the general
maintenance section in this instruction. No further steps are required.
To ensure compliance with the EMC requirements as specified in IEC 60601-1-2, it is essential
to use only the following accessories:
EEG Preamplifier Cable (short)
EEG Preamplifier Cable (long)
EEG Leads (used with long EEG cable only)
ATA Acoustic Transducer Cable (long)
ATA Acoustic Transducer Cable (short)
AC power cord for Power Supply (US)
AC power cord for Power Supply (UK)
AC power cord for Power Supply (EU)
AC power cord for Power Supply (AUS)
NOTICE: Conformance to the EMC requirements specified in IEC 60601-1-2 is ensured if the cable types and
cable lengths are as specified above: