Page 10 / 40
2 Explanation of Symbols
This section explains all symbols used within this manual and on the device label.
Symbols within this manual:
Important notice: please read for important information.
Warning: please read for safety-relevant information, which may cause risk of
danger to persons and/or device if not followed.
Symbols on the device label:
Consult instruction for use, i.e. this manual.
Manufacturer name and address, production date
Compliance with applied part type BF (body floating) requirements
according to DIN EN 60601-1
Device with safety class II according to DIN EN 60601-1
The device is electronic equipment covered by the directive 2012/19/EC on waste
electrical and electronic equipment (WEEE). When discarded, the item must be
sent to separate collection facilities for recovery and recycling.
CE mark to declare conformity with medical device directive 93/42/EEC. The
number below the CE mark refers to the identifier of the notified body.
For further symbols, e.g. on accessory labels, please refer to the respective manual or data sheet of
the accessory. Important symbols may include:
Single use only. Do not reuse the respective item.
Expiration date. Do not use the respective item after the specified date.
To Next Page
Loading...
