NV10/NV7.5 Operations and Maintenance Manual Operating the transmitter
Issue 3.4 2016-08-03 Page 2-3
Information is displayed in a series of pages (screens) that serve specific transmitter functions.
The AUI has the following configurable displays:
• Login Page (see Logging into the AUI on page 2-3)
• Events logs (see Logs page - viewing transmitter log on page 2-17)
• Instrumentation panels (Viewing instrument panels on page 2-29)
• Real-time meters (see Meters Page on page 2-45)
• Presets (see Presets - editing operational settings on page 2-50)
• Transmitter status (see Viewing transmitter status on page 2-66)
• Factory settings (see Factory Settings on page 2-69)
•System settings (see System Settings on page 2-78)
• User accounts (see User accounts on page 2-88)
• Changeover (see Changeover page on page 2-92)
• User settings (see User settings on page 2-94)
• Remote input/output configuration (see Remote I/O page on page 2-115)
See the complete AUI flow diagram illustrated in Figure 2.2 on page 2-5.
Logging into the AUI
The transmitter’s AUI provides a means to restrict local and remote access to transmitter
control functions to authorized users only. Users can create accounts that can be pre-defined
to set access restriction from view-only (no control), full control (all permissions), custom
(select permissions) and administrative control.
Remote access
To access the transmitter’s AUI remotely, perform the following steps:
1. Configure your network settings (see Setting up the network on page 2-95).
To Next Page
