23
7. Using a 32mm Open Faced Wrench or an Adjustable Wrench,
remove the Threaded Cap from the Frame Assembly.
8. Use the small standard screwdriver to remove the Wedge Bushing
exposed behind the Threaded Cap from the Frame Assembly, or safely tilt
the machine until the Wedge Bushing falls from the Frame Assembly.
Note: Be sure to notice how the Wedge Bushing engages within the engages within the
Frame Assembly to assist with re-assembly.Frame Assembly to assist with re-assembly.
9. Dispose of the old Wedge Bushing and Threaded Cap.
Threaded
Cap
To Next Page
Loading...
