Need help?Do you have a question about the Nautilus NB 2000 and is the answer not in the manual?
General| User Profiles | 4 |
|---|---|
| Resistance Type | Magnetic |
| Handlebar Adjustment | Yes |
| Transport Wheels | Yes |
| Heart Rate Monitoring | Yes |
| Display Type | LCD |
| Maximum User Weight | 300 lbs (136 kg) |
| Weight Capacity | 300 lbs (136 kg) |
| Seat Adjustment | Yes |
Attach the rear stabilizer to the base frame rear bracket using specific screws and washers.
Attach the front stabilizer to the base frame front bracket using specific screws and washers.
Install the boot shroud, connect cables, and attach the handlebar mast to the main frame.
Insert the seat post into the frame, secure height adjustment, and attach the seat to the desired angle.
Attach the handlebar assembly to the handlebar mast using specific screws and washers.
Connect computer and heart rate wires, then attach the computer and its lower case.
Thread the right and left pedals into the crank arms and install pedal straps.
Plug the 110 V adapter into the bike shroud and then into the wall outlet.
To Next Page
