NavAtlas DXP1000DVR User Manual

21
DXP1000DVR
Bluetooth Operation
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your device
before you begin the pairing process.
The unit broadcasts the pairing signal constantly when no
devices are currently connected. Complete the pairing sequence
from your Bluetooth device. Refer to the owner's manual for
your device for more details. The device name is "NavAtlas-****".
The Bluetooth passcode "0000". The unit can be in any mode of
operation when pairing is performed.
Note: On certain phones, pairing may need to be done more than
once if there are connectivity issues.
Most Bluetooth devices support the auto-connect feature and will
connect automatically if the device is in range when the unit is
powered-on. If your device was previously paired but does not
connect, enter the Bluetooth setup menu and ensure that Auto
Connect is On.
To access the phone, select Bluetooth Phone from the Main Menu
or press the phone icon from any operational mode.
Press to return to the Main Menu screen.
Displays current mode of operation.
Use the phone keypad to dial the desired phone number.
Alternately, numbers can be dialed directly from the phone.
Press to redial the last number called.
Press to backspace when typing a number with the keypad.
Press to connect a call.
Press to end a call.
Press to mute or unmute the call.
Press to display the keypad.
Press to display a log of recently-completed calls. Use the arrow
on the left of the scroll bar on the right to scroll through the list.
Preparation
Pairing a New Device
Connecting a
Paired Device
Bluetooth Phone
Main Menu
1
Current Mode Indicator
2
Phone Keypad
3
Redial
4
Backspace
5
Talk
6
End Call
7
Mute
8
Keypad
9
Recent Call Log
10
1
2
6
5
7
3
4
8
10
9

NavAtlas DXP1000DVR Specifications

General

Brand	NavAtlas
Model	DXP1000DVR
Category	Monitor
Language	English