19
11. Maintenance
Item
Service
Object
Actions
Every
month
Every 3
months
Every 500 km/
6 months
Every 1000 km/
1 year
Every 10000 km/
3 years
Functions
Brake
Adjustment
Tool: 5 mm hex key (the tool needs
to be prepared by the user).
Before adjusting, make sure the
charged. During adjusting, pull the
end of the brake cable to make the
cable tight.
Note: If the brake is too tight,
use the tool to loosen the screw
by turning it counterclockwise,
pull the disc brake rocker arm
outwards, and then tighten the
screw. If the brake is too loose,
use the tool to loosen the screw by
turning it counterclockwise, push
the disc brake rocker arm forwards,
and then tighten the screw.
√ √ √
Charging
Charge the scooter at a suitable
temperature. The indicator on
the battery charger is red when
the scooter is charging, and
turns green when the scooter is
fully charged. The control panel
will show the charging status
simultaneously during charging.
√ √ √
Steering
Turn the handlebar 60° to the left
and right to make sure the turning
angle is correct and the steering
is free from resistance and
stagnation.
√ √
Important
Components
Battery
Assembly
Fully charge the scooter before
leaving it unused for a long time,
and turn it on to charge every 60
days.
√
To Next Page
Loading...
