NAVEE N40 - 14. Troubleshooting

19
EN
14. Troubleshooting
Error Error Message Solution
E1
Rx Communication
Failure
Check whether the tail light is on, if not, replace the controller or
instrument. If it is on, please check whether the wire connection between
controller and instrument.
E2 Braking Error Check the wire connection or replace the brake level.
E3 Accelerator Error Check the wire connection or replace the accelerator.
E4 Wheel Motor Error
Check whether the wheel motor and the controller cord are well
connected or replace the motor.
E5 Controller Error Check the controller wire connection or replace the controller.
E6 Overheating Warning Wait until the battery temperature normalizes before resuming use.
15. Certication
FCC Supplier's Declaration of Conformity
This supplier's declaration of conformity is hereby for
Product: NAVEE Electric Scooter N40
Model Number(s): NKP21111-A30
Brand/Trade: NAVEE
We declare that the above mentioned device has been tested and found in compliance with CFR 47 Part Regulation.
Responsible Party—U.S.Contact Information
Company: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd.
Address: Building A2, Shangjinwan Headquarters Economic Park, No.2288, Wuzhong Avenue, Wuzhong Economic
Development Zone, Suzhou Jiangsu P.R. China
Country: China