Maintenance Instructions
Adjustments
NCR 5635 Spray Currency Dispenser Service Manual 4-39
NCR - CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Internal Timing of 5635 (Aria-Type) Pick Modules
4
The only relationship to be set in the pick unit is between the pick
wheel and the cam driven vacuum arm line.
Note
In a double pick unit make the adjustment on the upper pick
unit first
The method of setting is as follows:
1
Position the teeth mesh between the drive segment and pick
line so that the upper tooth of the drive segment is above the
upper tooth of the pick line.
2
Take off and retain the 26T idler gear (NCR part number 445-
0633190) directly below the pick line (left side of the module
master.bk Page 39 Wednesday, March 27, 2002 9:35 AM
To Next Page
Loading...