Getting Started
Opening/Closing The Standard Security Enclosure
P77 ATM - Operator Manual 2-13
Factory Set Combination - Unlocking
2
If the combination lock is set at the original factory setting of 50,
unlock it as follows, dialling on the opening index:
1 If a keylock is fitted to the combination lock, insert the key into
the lock and turn it clockwise.
2 Turn the dial a minimum of four turns counter-clockwise and
stop on 50.
3 Turn the dial slowly clockwise until the bolt retracts. The lock is
now open. Use the handle on the door to retract the door bolt
and open the door.
0
90
80
70
60
50
40
30
20
10
Changing Index
Opening Index
Dial
Book.bk Page 13 Tuesday, July 24, 2001 9:13 AM
To Next Page
Loading...
