Getting Started
Opening/Closing The Standard Security Enclosure
2-14 P77 ATM - Operator Manual
Customer Set Combination - Unlocking
2
If the combination has been set at a three-number combination, for
example 36-82-44, unlock it as follows:
1 If a keylock is fitted to the combination lock, insert the key into
the lock and turn it clockwise.
2 Turn the dial counter-clockwise, passing the first number (36)
three times, stop on the first number (36) the fourth time.
3 Turn the dial clockwise, passing the second number (82) twice,
and stop on the second number (82) the third time.
4 Turn the dial counter-clockwise, passing the third number (44)
once, and stop on the third number (44) the second time.
5 Turn the dial clockwise until the bolt retracts. The lock is now
open. Use the handle on the door to retract the door bolt and
open the door.
Combination Lock - Locking
2
To lock the combination lock, turn the dial at least four complete
turns counter-clockwise. If a keylock is fitted to the combination
lock, turn the dial until 0 is in line with the opening index and then
turn the key counter-clockwise and remove it from the lock.
Combination - Changing
2
Detailed instructions on how to change the combination of a lock
are inside the security enclosure.
Book.bk Page 14 Tuesday, July 24, 2001 9:13 AM
To Next Page
Loading...
