NCR CX5 - Page 9

CX5/CX7 Side Scanner/Imager 7
11. Secure the Imager with a screw.
12. Reinstall the Display Back Cover.
13. Reconnect the 180-degree USB-CCable and Ethernet Cable.
14. Reinstall the Cable Cover.
Programming the Imager
To program the imager to work on a Retail or Hospitality (Aloha)POS, refer to the
following sections in the Imager Setup Sheets document (BCC5-0000-5470):
https://onlinehelp.ncr.com/Retail/Scanners/ImagerSetup/HTML/FrontMatter-HTML/Home.htm
• Retail
• Honeywell N6600/N6700 Retail Quick Imager Setup
• Hospitality (Aloha)
• Honeywell N6600 Aloha Programming Sheet