NCR XL7W - Connecting to a POS Terminal; Display Port Model

Hardware Installation 2-18
Connecting to a POS Terminal
The following illustrations show the host terminal cable connections.
Display Port Model
Video Display Y-adapter Cable
The Y-adapter Cable provides video, USB, and power to the display.
1. Connect the USB-C end of the Y-adapter Cable to the display.
2. Connect the Display Port end of the Y-adapter Cable to the Display Port connector
on the host terminal.
3. Connect the Powered USB end of the Y-adapter Cable to the 12VPowered
USBconnector on the host terminal.