NCTE 2000 Series - Accessories

_______________________________________________________________________________________
_______________________________________________________________________________________
Page 15 of 16
Series 2200 (Round shaft)
Measuring range [Nm]
Scope of delivery
2.5
including 5m cable and calibration certificate
5
including 5m cable and calibration certificate
7.5
including 5m cable and calibration certificate
17.5
including 5m cable and calibration certificate
75
including 5m cable and calibration certificate
175
including 5m cable and calibration certificate
250
including 5m cable and calibration certificate
500
including 5m cable and calibration certificate
We would be pleased to provide you with further information about serial products in a personal contact
under
Phone: +49 (0)89 66 56 19 30 or by e-mail: sales@ncte.de.
10 Accessories
Bracket
1
2.5 – 17.5 Nm (Art. No.: 400006081)
2
75 – 250 Nm (Art. No.: 400006082)
Readout unit
1
Order number 400010-ATS001
(Art. No.: 400010005)
The NCTE readout unit is a multifunctional readout unit for
the NCTE torque sensors. Torque, angle or speed can be
displayed. The measured data can be stored on an inserted
SD flash memory card or sent directly to a PC in real time via
a USB interface.
Couplings
coupling types
Used for
D2 max.
KB2/45-41-9-D2
2000 – D9
16
KB2/100-47-9-D2
2000 – D9
25
KB4C/18-59-9-D2
2000 – D9
25.4
KB4C/80-78-14-D2
2000 – D14
42
KB4C/200-83-19-D2
2000 – D19
45
KB4C/300-94-19-D2
2000 – D19
60
KB4C/500-100-25-D2
2000 – D25
70
You can obtain further or additional accessories and special requests in a personal discussion with your
contact person for series products by calling +49 (0)89 66 56 19 30 or by e-mail: sales@ncte.de.