NCTE 2000 Series - Declaration of Conformity

_______________________________________________________________________________________
_______________________________________________________________________________________
Page 6 of 16
1.4 Declaration of conformity
The manufacturer
NCTE AG
Raiffeisenalle 3
D-82041 Oberhaching
hereby declares that the following product
Product designation: Torque sensor series 2000
Trade designation: Series 2000
Model names: 2200-2,5
2200-5
2200-7,5
2200-17,5
2200-75
2200-175
2200-250
2200-500
conforms to the requirements of the EMC Directive 2014/30/EU – including its amendments in force at the
time of this declaration.
The following harmonized standards were applied:
EN 61000-6-2:2019-11
EN 61000-6-4:2020-09
EN 61326-1:2013-07
EN 61326-1:2018-09 (Draft)
The following national laws, standards and specifications were applied:
Electromagnetic compatibility law – EMVG
Place: Oberhaching
Date: September 15
th
2020
______________________________ ______________________________
Dr. Jürgen Uebbing, CEO Ms. Verena Graf, COO
______________________________
Mr. Bernhard Mayr, Technical Director