L R M - 10 – U s e r M a n u a l
6
Overview
The figure below shows an overview of the LRM-10 features.
1. Probe connector: Allows the user to connect a probe to the LRM-10
micro-ohmmeter.
2. Charger & RS232 communication port: Allows charging the batteries
and transferring the measurement data to a computer.
3. I/O button: Press to turn ON or OFF the instrument.
4. Backlight button: Press to activate the display backlight.
5. Mode button: Press to change the measurement mode.
6. Display: The LCD screen displays the measurement data.
7. Go button: Press to start a new measurement.
8. Battery compartment: Only use the recommended batteries.
To Next Page
Loading...