www.neatech.it
40/126
4.1.2 Rnet 80 A control system
Figure 33
Use this function to turn on and off the
wheelchair. Don't use this function to stop
the wheelchair unless it is an emergency.
Use this function to navigate all working
mode of the wheelchair. For example it is
possible to choose between drive and seat
function.
As default in the wheelchair they are saved
some different drive profile for the use indoor
and outdoor.
Use the function PROFILE to change different
types of profiles: they are sorted from the
more indoor ones to the more outdoor ones.
For each profile it is possible to change the
speed.
To Next Page
Loading...
Need help?
General