Neatech Rehab Series User Manual

www.neatech.it
42/126
4.2 Manual brake release lever
In case of necessity it is possible to manually move the wheelchair.
First of all, you have to turn off the wheelchair.
Then you can act on the release lever shown in Figure.
When the brakes are released. it is not possible to drive the wheelchair.
Figure 34
UNLOCKED
LOCKED
LOCKED
UNLOCKED
WARNING
When the brakes are released never use the wheelchair on a slope or a wet
surface.
Don’t operate the brake release without the presence of an assistant.
WARNING
The drive system should be re-engaged before an occupant is left
unattended or attempts to operate the wheelchair.
WARNING
Always act on both left and right manual release levers.

Neatech Rehab Series Specifications

General

Brand	Neatech
Model	Rehab Series
Category	Wheelchair
Language	English