www.neatech.it
44/126
• Belt restraints should be adjusted as tightly as possible, consistent with user comfort.
• Belt should not be twisted during the use.
IMPROPER BELT RESTRAINT FIT
BELT RESTRAINTS MUST NOT BE HELD AWAY
FROM THE BODY BY WHEELCHAIR
COMPONENTS SUCH AS ARMRESTS OR
WHEELS
PROPER BELT RESTRAINT FIT
BELT RESTRAINTS SHOULD MAKE FULL
CONTACT WITH THE SHOULDER, CHEST AND
PELVIS AND PELVIC BELTS SHOULD BE
POSITIONED LOW ON THE PELVIS NEAR THE
THIGH ABDOMINAL JUNCTION
In order to mount pelvic belt on the wheelchair, firstly
mount the fixing plate as shown in figure.
Use socket head cap screw M6x10 and a 5 mm allen
wrench.
Repeat operation for both left and right side of the
wheelchair.
To Next Page
Loading...
Need help?
General