Nebula Prizm - Important Safety Instructions; Setup Safety Precautions

English
01
Important Safety Instructions
Read and understand all instructions before you use this device.
Do not make any changes or settings that are not described in this
manual. If physical injury, loss of data, or damage is caused by
failure to follow instructions, the warranty does not apply.
Setup
• Toreducetheriskofreand/orelectricshock,donotexpose
thedevicetorainormoisture,andobjectslledwithliquids,
such as vases, should not be placed on the device.
• Donotplacethedeviceinareassusceptibletoexcessive
dust and dirt or near any appliance generating a strong
magneticeld.
• To prevent overheating, do not block or clog the ventilation
openings.
• Neverplacethedeviceinaconnedspace.Alwaysleave
enough space around the device for ventilation.
• Protect the device against direct sunlight, heat, large
temperature fluctuations, and moisture.
• When the device runs for a long period of time and the
surface becomes hot, shut it down and unplug the power
cord. Resume operation only after the device has cooled.
• Always handle the device with care. Avoid touching the lens.
• Never place heavy or sharp objects on the device or the
power cord.
• To avoid electric shock, do not disassemble.
• Onlyuseattachmentsoraccessoriesspeciedbythe
manufacturer.
• Avoidextremevibration.Itmaydamagetheinternal
components.
Table of Content
01 ImportantSafetyInstructions
04 What’sIncluded
04 Overview
07 GettingStarted
11 UsingtheNebulaPrizm
15 UpdatingtheFirmware
16 Specications
17 Troubleshooting
18 Notice
19 Trademarks
20 Warranty