4-12
V. Position
Adjust the horizontal image position.
Indicator Value and Bar of minimum position should be 0.0%
Indicator Value and Bar of maximum position should be 100.0%
Factory setting: Optimal value for the signals which is stated in the VESA standard.
Down/Up (V.Posi) (Icon select) Down/Up (V.Posi) (adjust)
1. During V.Posi function operate, V. Posi Icon and slide bar color is changed from Normal condition.
2. “-” Value decrease (to down)
3. “+” Value increase (to up)
4. At exiting from this state, adjusted value is saved to EEPROM.
Down/Up (V.Posi) (Reset)
Recall V. Posi value to factory setting
To Next Page
Loading...
