© NEC Nederland B.V. 2011 Page 16 of 34 AP400 – All Types Installation Manual
When the AP400 is mounted horizontally, the antenna position must be changed (see
chapter 2).
Figure 2. AP400 mounted horizontally
1.11 INSTALLATION PROCEDURES
The installation of an Outdoor Cabinet comprises the installation of:
Adjusting the Antenna position (if necessary).
Mounting the G.729 Daughter Board (if applicable)
Mounting the AP400 against the wall.
Connecting directional antennas, if necessary.
Note: The minimum distance between AP400s (DECT Access Points) must be more
than 1 meter. (However, it is strongly recommended to respect a minimum
distance of 5 meters between the AP400s.)
To Next Page
Loading...
