© NEC Nederland B.V. 2011 Page 32 of 34 AP400 – All Types Installation Manual
A SPECIFICATIONS
Dimensions / Environment:
Dimensions (W x D x H) ............................... : 145 x 43 x 174
Outside temperature range ........................... : -5 C . . . 45 C
The AP400 should not be exposed
to sunlight. .
IP Specification ........................................... : In Outdoor Box = IP66
Relative Humidity ......................................... : 5 . . . 95 %
PoE Specifications:
Voltage at AP400 via PoE ........................... : 36 . . . . 57 V. DC
PoE Class .................................................... : Class 2
Power Consumption ..................................... : 6 Watt maximum
Note: PoE source must comply with clause 2.5 (Limited Power Source) per EN 60950-1
IP Specifications:
IP Network ................................................... : 10/100Base-T IEEE802.3
Connector: ................................................... : RJ45
Cable ........................................................... : Cat 5 / Cat 6 UTP.
Cat 7 is not supported.
IP Version .................................................... : IPv4
DHCP/TFTP support .................................... : Yes
Quality of Service ......................................... : IEEE802.1Q, IEEE802.1P
Audio CODEC:
AP400: ......................................................... : G.711
AP400 with Daughter Board ......................... : G.711 and G.729
Country/Region support:
EMEA ........................................................... : 1880 – 1900 Mhz
Latin America ............................................... : 1910 – 1930 MHz
Brazil ............................................................ : 1910 – 1920 MHz (< 20 dBm)
To Next Page
Loading...
