Using Your Telephone
If you’re on a Handsfree Call (see
Handsfree Options below), lift the
handset for privacy.
These Volume Controls are for
speaker, handset and ringing calls.
Handsfree Options
•
Handsfree lets you place and answer calls by pressing instead of using the handset.
•
With Automatic Handsfree, you can press a line or Line Appearance key without lifting
the handset. Normally, you have Automatic Handsfree.
•
Use Handsfree Answerback to answer a voice-announced Intercom call by speaking
toward your phone — without lifting the handset.
The Microphone picks up your voice for
Handsfree calls. Press
MIC to turn off
the microphone.
Press for Handsfree calls, or use the
handset instead. See
Handsfree Options below.
While on a handset call, press SPK once for
Handsfree; twice for
Group Listen.
Line Appearance Keys are Intercom keys
for placing and answering calls. If you’re busy
on one – just use the other.
Due to the flexibility built into the system,
your
Dialing Codes and Feature
Capacities
may differ from those in this
guide. Check with your Communications
Manager and make a note of any differences.
These are and/or
keys. See Programming Function
Keys
for more on setting up these
keys.
The Message Wait LED flashes when you
have Messages Waiting. If you don’t have a
Voice Mail key, it also flashes when you have
Voice Mail messages left in your mailbox.
Press CALL1 then LND to
automatically redial the last number
you called.
Enable Do Not Disturb to block your calls
when you don’t want to be interrupted. This
key will also flash when Call Forwarding
is activated.
Press CALL1, DIAL and dial a bin number for
Common Abbreviated Dialing.
To Next Page
Need help?
General
