NEC AT-50 - BASIC OPERATION; Making a Call using the Handset; Receiving a Call using the Handset

BASIC OPERATION
7
BASIC OPERATION
Making a Call using the Handset
1. Pick up the handset and wait for dial tone.
2. Dial the desired number.
3. Replace the handset when you finish the call.
Or, to preview the dialed number:
1. Dial the desired number with handset on-hook.
2. You may press the DELETE key to erase dialed digits one at a time.
3. When you have finished dialing, lift the handset.
4. Replace the handset when you have finished the call.
NOTE
Adjust the volume if needed using the Handset Volume Control Switch.
Receiving a Call using the Handset
1. Lift the handset when the phone rings.
2. Converse with your caller.
3. Replace the handset when you finish the call.
NOTE
Adjust the volume if needed using the Handset Volume Control Switch.