NEC C - Pincushion Control

24 Adjusting the monitor
Pincushion control
Use the OSD control panel and the pincushion control icon to adjust
the screen for concave or convex sides.
Pincushion icon
1.
Press
MENU
twice to bring up the OSD control panel.
2.
Press
SELECT
or until the pincushion icon is
highlighted.
3.
Press
ADJUST
to make the sides of the display more
convex.
4.
Press
ADJUST
to make the sides of the display more
concave.
5.
Press
MENU
to save the setting and turn off the OSD control
panel.