NEC DSX INTRAMAIL FEATURE - Time and Date Stamp; Time and Date Stamp with Caller ID

Time and Date Stamp
DSX Feature Handbook IntraMail Features ◆ 85
IntraMail
Features
Time and Date Stamp
Description
While listening to a message, a Subscriber Mailbox user can dial TI to hear the Time and Date the message
was left. This is a handy option while reviewing messages. The subscriber can just dial a code to find out
when the message arrived.
Time and Date Stamp with Caller ID
With caller ID installed, a mailbox user can dial TI while listening to a message from an outside caller to hear
the time the message was sent, as well as the caller’s number. This capability is always available for mes-
sages left by an Intercom caller.
Operation
A mailbox user can listen to a message and dial a code to hear the time the message was sent,
as well as the caller’s number.
Hearing the Time and Date a Message was Left
[Super Display Soft Key] - [Keyset Soft Key]
Log onto Subscriber Mailbox.
L (5)
Access the Message Listen mode.
[Listen] - [Lstn]
TI (84)
Hear the time and date the message was sent.
• Turn to Listening to Messages (page 56) for more on your listening options.
0
Plays Help message