NEC DT830 Series - TO SET A LANGUAGE

52
• TO SET CALENDAR FORMAT
The following explains how to set the time display
pattern on the LCD.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 3: Select Display.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 4: Select Calendar Format.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
Note:
This setting is available for the following condi-
tions.
• SV9500 V2 or later
• Terminal firmware version 3.0.3.0 or later
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu

User Setting
3
3
1
2
[User Setting]
3
4
5
6
Change Password
Peripherals
OKBack

Security
Incoming Call
Talk

Display
7
Usability
1
1
1
2
[Display]
3
4
5
6
Back Light
Language
OKBack

Font Size
Local Volume
Screen Saver
Calendar Format