NEC DT830 Series - Page 88

79
STEP 13:Enter the destination directory of the FTP/
TFTP server and then press or the OK
soft key.
STEP 14:The display goes back to the FTP Settings
screen. Press or the Back soft key to dis-
play the Backup/Restore screen.
STEP 15:Select Server Address.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 16:Enter the IP address of the destination FTP/
TFTP server. For example, to set the IP ad-
dress of 10.41.208.205, enter 10*41*208*205
[separate with an asterisk (*)].
After entering the IP address, press or
the OK soft key.
Note:
For details on character entry method, see HOW
TO INPUT CHARACTERS in chapter 4 Basic
Operation.
1
2
[FTP Settings]
3
OKBack
User ID
Password

Folder
OKBack
BK
A
[Folder]
Input a folder name.
1
2
[FTP Settings]
3
OKBack

Folder
User ID
Password
3
3
1
2
[Backup/Restore]
3
4
OKBack

Data Backup
Data Restore

5
FTP Settings
Protocol
Server Address
[Server Address]
OKBack
BK
1
‘*‘For‘.‘
.
.
.