English - 13
Please refer to “WARNING 7”, “WARNING 8”, “WARNING 9”, “WARNING 10”, and “WARNING 11”.
Contact your supplier as they may be able to provide a list of qualied installation professionals. Mounting the product on a wall
or ceiling and hiring a technician are the customer’s responsibility.
• Periodically check for loose screws, gaps, distortions, or other problems that may occur with the mounting equipment. If a
problem is detected, refer to the qualied personnel or the supplier for service.
• Depending on the environment, the mounting location may weaken due to natural degradation. Regularly ask the qualied
personnel to inspect the mounting location and carry out maintenance.
NEC Display Solutions assumes no responsibility regarding any damage that may be caused by inadequate installation, misuse,
modication of the product, natural disasters, or other such causes.
When asking the qualied personnel for installation, inform them of the precautions mentioned in “Mounting (for Trained
Installers)”.
Please refer to “WARNING 7”, “WARNING 9”, and “WARNING 10”.
Commercially-available cord or chain
E498/E438: 400 mm
E328: 100 mm
Screw hole
Commercially-available
cord or chain
Commercially-available screw
(M6, 15 mm)
Commercially-available
clamp
To Next Page
Loading...
