NEC E328 - When [RS-232 C] Is Selected for Control and Switching between Picture Modes; Switching between Picture Modes

English - 36

The Information OSD provides information such as the selected video input terminal, resolution, and IP address. Press the INFO
button of the remote control to bring up the information OSD.
1

2

3

4

* When [Information OSD] is set to [On]:
White: Connected to a LAN
Red: Not connected to a LAN
HDMI1
1080p@60Hz
SDR
IP ADDRESS : 192.xxx.x.xx
2
3
4
1
 When the input signal is [Media Player], the information OSD will not be displayed.

Press the SOUND button of the remote control to change the Sound Mode setting between Standard, Music, Movie, and
Custom.

Press the PICTURE button of the remote control to change the Picture Mode setting between Dynamic, Standard, Energy
Savings, Conferencing, HighBright, Custom, and HDR Video*.
* HDR Video can be selected only when an HDR signal is input.