1 - 6 Introduction
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
All but the DTR-2DT-1 are compatible with the AD(A)-R, AP(A)-R,
AP(R)-R and CT(A)-R Unit adapters. The AP(R)-R Unit requires an
AC-R Unit to supply AC power. For Attendant Positions, an Attendant
Add-On DCR-60-1 CONSOLE is available with 60 station, outside line,
and or function key assignments. The DTR-2DT-1 has an internal
Analog Port without ringer.
Two-line terminal with two Flexible Line keys (each with 2-color LED),
nine function keys, built-in speakerphone, a large LED to indicate
incoming calls or messages, and an outgoing only Analog SLT Port
(AD[A]-R).
The Electra Elite IPK Single Line Terminals are offered in two variations
(DTR-1-1 and DTR-1HM-1). Both terminals come in black or white.
Both have DTMF and Pulse Dialing compatibility, and offer Flash and
Redial key functionality. The Electra Elite IPK Single Line Terminals
come standard with a Message Waiting Indicator that also functions as
an Incoming Call Indication. During a call, the receive audio level can
be increased three levels and decreased two levels from the default
setting (six volume level settings in all). The terminals offer four ring
volume settings (Off, Soft, Medium, and Loud), and three ring patterns
(Slow, Medium, and Fast). The DTR Single Line Terminals also have a
Data Port that functions similar to that of an AP(R)-R optional adapter,
and have a built-in wall mount adapter. The DTR-1HM-1 terminal has
eight programmable speed dial buttons (maximum 21 digits each). The
DTR-1HM-1 also has Hold and Monitor Function keys.
J
Electra Elite and D
term
Series E Terminals
The Electra Elite Terminals (DTU telephones) and D
term
Series E
terminals (DTP telephones) are available in a variety of colors, display and
non-display types and lines sizes.
Ter minals are available in black or white.
Two terminal types: with LCD and without LCD. The large Liquid
Crystal Display (LCD) on the display terminals provides call status data
and programming information.
Line sizes include: 8-line, 16-line and 32-line.
Speakerphones with full handsfree operation and headset jacks are
standard.
The D
term
Handset Cordless terminal is a 16-button phone (display
only).
To Next Page
Loading...
