2 - 14 Features
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
C-7
CALL FORWARD – ALL CALL
Call Forward – All Call forwards all calls directed to one station to another
station, Voice Mail system, or to the Attendant. This permits more efficient
call processing by allowing a station to be left unattended and have calls
answered at another location. Call Forward – All Call can be set or canceled
at the destination station. Attendant Positions can be used to cancel Call
Forward – All Call system-wide.
With R2000 or higher, System Administration Terminal (SAT) software
allows Call Forward settings to be assigned and saved as part of the site
database.
C-8
CALL FORWARD – BUSY/NO ANSWER
Call Forward – Busy/No Answer forwards calls directed to one station, to
another station, Voice Mail system, or to the Attendant Position for Busy or
Ring No Answer. This permits more efficient call processing by allowing
calls to be routed to another station or to the Attendant Position.
With R2000 or higher, System Administration Terminal (SAT) software
allows Call Forward settings to be assigned and saved as part of the site
database.
C-9
CALL FORWARD – CENTREX
The Call Forward Split for Centrex feature allows a station to forward an
incoming Centrex CO call to an outside location using the same Centrex CO
line to free the line for additional use.
With R2000 or higher, System Administration Terminal (SAT) software
allows Call Forward settings to be assigned and saved as part of the site
database.
C-10
CALL FORWARD – DISPLAY
When a call is forwarded from one Multiline Terminal to another, the
forwarding indication and forward station number are shown on the Multiline
Terminal display.
With R2000 or higher, System Administration Terminal (SAT) software
allows Call Forward settings to be assigned and saved as part of the site
database.
To Next Page
Loading...
