NEC Electra Elite IPK - Page 95

Electra Elite IPK Document Revision 4
General Description Manual 2 - 41
___________________________________________________________________________________
___________________________________________________________________________________
S-8 SLT ADAPTER
The Single Line Telephone (SLT) Adapter allows a port of an ESIB(8)-U( ) or
ESIE(8)-U( ) ETU to support a Single Line Telephone. A Single Line
Telephone can be connected to the ESI(8)-U( ) ETU using the SLT Adapter
and 2-wire cable. Eight SLT(1)-U( ) ADP Single Line Telephone Adapters
can be installed in the Electra Elite IPK system.
With R2000 or higher, a Single Line Telephone connected to the
SLT(1)-U( ) ADP can be used to perform a Trunk-to-Trunk Transfer or make
a 1 terminal to 2 outside parties conference call.
S-9 SLT TIMED ALARM
A Timed Alarm (reminder) may be set at any Single Line Telephone. At a
programmed time, the system automatically calls the Single Line Telephone
station user to indicate a scheduled action.
S-10 SOFTKEYS
The Electra Elite IPK system provides softkeys on all display Electra Elite
IPK (DTH/ITH), D
term
Series i (DTR), Electra Elite (DTU), or D
term
Series E
(DTP) Multiline Terminals. Currently Speed Dial Scrolling Directories,
Account Code – Forced/Verified/Unverified, and EliteMail Digital Voice Mail
systems make extensive use of these keys to guide a station user
effortlessly through difficult-to-use feature operations.
With R4000 or higher, Interactive softkeys are supported.
S-11 SPEED DIAL - STATION
When 100-memory allocation is specified, each station in the system can be
assigned 20 Station Speed Dial buffers. Each Station Speed Dial buffer may
contain 24 digits or four other buffer numbers (Nesting Dial) and the called
party name. The DTH/DTR/-32D-1 TEL, DTU/DTP-32-1 TEL, and
DTU-32D-2 TEL have 16 One-Touch keys that can also be used for Speed
Dial. The One-Touch key buffer may contain a maximum of 16 digits with no
characters for names.
Using System Software these keys can be used for station speed dialing in
addition to the 20 station speed dial buffers. System Software permits input
stored characters to be entered on the dial pad.