NEC Express5800 320La Installation Notes

Express5800/320La Service Pack 3 Installation Notes 3
Prerequisites
Hardware
! NEC Express5800/320La Server with Windows 2000® Advanced Server installed.
Software
! NEC EXPRESSBUILDER ver. 2.002b-G CD-ROM
! Microsoft® Service Pack 3 CD-ROM
! Free disk space as specified by Microsoft’s SP3 requirements.
Installation
1. Close all running applications on the 320La server running Windows 2000
Advanced Server.
2. Change the “ BMC Fault Tolerant Service “ to Manual Start.
 Start/settings/control panel/administrative tools/services/ BMC Fault
Tolerant Service/startup type
 Select Manual.
3. Using PROSET, break the teaming of network cards.
 Start/programs/intel/proset
 Right click on Team.
 Select Break Team.
4. Uninstall the PROSET application from your system.
 Start/settings/control panel/add-remove programs
 Select Proset.
 Click Remove.
5. Reboot your server and login as administrator.
6. Insert the EXPRESSBUILDER Version 2.002b-G CD into your CD-ROM
drive. The CD auto-runs to the main menu.
7. At the EXPRESSBUILDER Master Control Menu, click Setup.
8. On the fly-out menu, select “Update NEC Express5800 system.”
9. At the setup message dialog box, click Yes.
10. Another dialog box appears. Disregard this dialog box and remove the
EXPRESSBUILDER CD and insert the Microsoft Service Pack 3 (SP3) CD.

NEC Express5800 320La Specifications

General

Form Factor	Tower
CPU	Intel Xeon Processor
Storage	SCSI/SATA
Network	Integrated Ethernet
Operating System Support	Windows Server, Linux
Expansion Slots	6 total: 2 x 64-bit PCI, 2 x 32-bit PCI, 1 x shared PCI/ISA, 1 x ISA