Express5800/320La Service Pack 3 Installation Notes 5
If not, make sure that both drives are dynamic disks.
Right click on the first drive and select “Create Volume”
25. Follow the instructions on the screen indicating how to create the new mirror
set.
26. Start the Windows 2000 Device Manager, and select View>Device by
Connection.
27. Uninstall the “ Stratus Enclosure Services NEC GEM Processor ” device.
28. Uninstall the “ Stratus Fault Tolerant Virtual 69000 video “ device.
29. Uninstall the “ Virtual Host Bus Adapter “ device.
Note: There will be two instances of this device.
Uninstall only the one without any disk drives listed under it.
30. Reboot your system.
31. Install the ESMPRO Agent from the ExpressBuilder Master Control Menu.
32. Enable Teaming on your network cards using PROSET.
Start/programs/intel/proset
Select “Create Team.”
Select the first network card.
Select the second network card.
Click on Finish.
33. Apply the Veritas Volume Manager 2.7 for Windows 2000 Hotfix05 from
the ExpressBuilder Master Control Menu.
34. Install the NEC ESMPRO report service for Volume Manager from the
ExpressBuilder Master Control Menu.
35. The system update to FT software Kit 1.3 and SVP3 has been completed.
36. If your system has any options installed, run the appropriate batch file
associated with that option. See the following table.
Options Batch File
NU515 / Pro 100+ NIC CD\WINNT\W2K\N850475.BAT
062-02021-000 / QLA12160 HBA CD\WINNT\W2K\N8803001.BAT
NU516 / QLA1080 HBA CD\WINNT\W2K\N8803002.BAT
062-02020-000 / FT DEU 2X13 HDD D\WINNT\W2K\N8890001.BAT
062-02173-000 / S1200 HOST HBA PKG CD\WINNT\W2K\N8803030.BAT
NU570/N570-P/NU571/NU571-P Pro1000 Copper / Fiber CD\WINNT\W2K\N810484.BAT
To Next Page
Loading...
Need help?
General
