Procedures after Completion of Installation 5-9
Setup of NEC ESMPRO Agent
The settings of installed NEC ESMPRO Agent remain unchanged from those at shipment. Click the
[Start] button, [Setting], and [Control Panel] sequentially to open [Control Panel].
If you double-click the [NEC ESMPRO Agent] icon in [Control Panel], the property dialog box will
appear. Modify the setting of each sheet in the dialog box to be fit to the used environment. The
notes on setup and the necessary information are explained in “Supplement” in Chapter 5 of User’s
Guide in the separate volume. See the supplement for setup or suspicion of malfunction.
To Next Page
Loading...
