5-2 Procedures after Completion of Installation
INSTALLING MANAGEMENT UTILITIES
The provided "NEC EXPRESSBUILDER" CD-ROM contains "NEC ESMPRO Agent" for
monitoring NEC Express5800/ft series and "NEC ESMPRO Manager" for managing the NEC
Express5800/ft series. Install and setup these utilities in the NEC Express5800/ft series or the
computer (management PC) that manages the NEC Express5800/ft series.
NEC ESMPRO Agent
NEC ESMPRO Agent is automatically installed by executing the “Fault Tolerant Server series setup
program.”
Click [Start] then [All Programs], and make sure that the installed utility folder exists. If it has not
been installed while setting up the Fault Tolerant Server series, install it separately.
IMPORTANT:
Make sure that NEC ESMPRO Agent is installed because it is indispensable for continuous
operation of NEC Express5800/ft series.
To set details about NEC ESMPRO Agent, double-click the [NEC ESMPRO Agent] icon in the
[Control Panel] dialog box. The properties dialog box appears for changing the settings.
For details on the set items, see the online help displayed by clicking on [Help].
To Next Page
Loading...
