NEC Express5800 R120e-2M - Configuration Diagram; Expansion Slots

SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
NEC Corporation Revision 3.0 – January 16, 2014 13
Configuration Diagram
Legend: Minimum required components Standard components
Expansion Slots
Legend
Common
#1A
PCIe 3.0 x8, x8 connector, for a dedicated RAID controller
#1C
PCIe 3.0 x4, x8 connector, Low-profile, up to 220 mm length
#2C
PCIe 3.0 x4, x8 connector, Low-profile, up to 220 mm length
#3C
PCIe 3.0 x8, x16 connector, Full-height, up 220 mm length
#1D
PCIe 3.0 x8, x8 connector, for a flexible integrated NIC (LAN Riser)
PCIe Riser
Card Kit
#1B
PCIe 3.0 x8, x16 connector, Full-height, up to 220 mm length
#2B
PCIe 3.0 x8, x16 connector, Full-height, up to 312 mm length
PCIe x16
Riser Card
Kit
#1B
PCIe 3.0 x16, x16 connector, Full-height, up to 220 mm length
#2B
Not available
PCI-X Riser
Card Kit
#1B
PCIe 3.0 x8, x16 connector, Full-height, up to 220 mm length
#2B
64bit / 133 MHz / 3.3V PCI-X, Full-height, up to 312 mm length
PCI Riser
Card Kit
#1B
64bit / 33 MHz / 5V PCI, Full-height, up to 220 mm length
#2B
64bit / 33 MHz / 5V PCI, Full-height, up to 312 mm length
NOTE:
 Up to 312 mm length card can be installed into slot #1B when N8116-28 Full Length PCI Card installation
Kit is installed.
 The slot #3C is available in dual processor configuration.
2.5-inch
Drive Cage
2.5-inch
Drive Cage
Optical
Drive Bay /
Media
Bay
Cooling Fan
Cooling
Fan
Redundant Cooling Fan
Processor #2
6 DIMM
Slots
6 DIMM
Slots
Hot plug
Power Supply #1
Hot plug
Power Supply #2
RAID Slot
LAN Slot
PCIe 3.0
PCIe 3.0
PCI Riser
CHASSIS
FRONT
CHASSIS
REAR
Processor #1
6 DIMM
Slots
8 2.5-inch
Drives
4 RAID BBU Slots
#3C
#2C #1C
#2B #1B
LAN
Optical Drive Bay
Media Bay
Hot plug
Power
Supply #2
Hot plug
Power
Supply #1
2 DIMM Slots
6 DIMM Slots
CHASSIS
TOP
8 2.5-inch
Drives
#1C
#1B
#2B
#1A
#2C
#3C
#1D