NEC Express5800 R120e-2M - References; Server Management

SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
NEC Corporation Revision 3.0 – January 16, 2014 40
References
Server Management
The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Standard
With Remote KVM
and Media License
kit
Hardware
monitoring
Temperature/voltage/power/standard
LAN/fan/degeneration (memory/hard
drive)


Hardware event log collection


Boot monitoring
Booting, BIOS/POST stall, OS stall,
shutdown


Alerting
HW error, Boot error and OS panic
(by SNMP, E-Mail)


Remote KVM
POST/BIOS setup, DOS utility

2


(via LAN)
Panic screen, Boot screen

2


Text-based screen (OS console)

2


GUI-based screen (OS console)
-

Remote console recording
-

Remote control
Remote reset/power on-off/ dump


(via LAN)
OS shutdown

1


1

Remote media (CD/DVD/FD)
-

Server Management Command Line
Protocol (DMTF compliant)


Remote control via Web browser
(without dedicated app)


Remote batch


Scheduling (without UPS)

1


1

Others
Set automatic IP address via DNS/DHCP


Remote wakeup
Wake On LAN, Wake On Ring


Centralized
management
Monitoring and control of multiple servers


Industry standard
IPMI
2.0
2.0
1
The feature is not supported on VMware ESXi systems.
2
The optional serial port is not available for the feature.
3
Monitoring boot screens is not supported on VMware systems.
4
In VMware systems, only the direct console user interface is supported.