NEC Express5800 R120e-2M - Internal Drive Configuration

SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
NEC Corporation Revision 3.0 – January 16, 2014 22
4.2 Internal Drive Configuration
4.2.1 Up to four Drives with Embedded SATA Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4 x SATA ports
(Standard)
Cable
Internal SATA Cable
1 x mini-SAS to 1 x mini-SAS
(Standard)
Drive Cage
2.5-inch Drive Cage
8 x 2.5-inch Hot-plug hard drive bays
(Standard)
Drive
4 slots
available
SATA
HDD
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-356
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-357
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
N8150-358
NOTE:
 Hot plug insertion/removal are not supported in the configuration.
 The maximum transfer speed for Slot 2 and Slot 3 is 3 Gb/s.