NEC Express5800/R120g-2E - Configuration Diagram; Expansion Slot

CONFIGURATION GUIDE – NEC Express5800/R120g-2E
NEC Corporation Revision 7.0 – August, 2017 11
Configuration Diagram
Legend: Standard Components Minimum required components
Expansion Slot
Legend
Remarks
#1
PCIe 3.0 x8, x8 connector, Low-profile, up to 168 mm length
2 CPUs required
#2
PCIe 3.0 x16, x16 connector, Low-profile, up to 200 mm length
#3
PCIe 3.0 x8, x8 connector, Low-profile, up to 200 mm length
#4
PCIe 3.0 x16, x16 connector, Low-profile, up to 200 mm length
#5
PCIe 2.0 x4, x8 connector, Low-profile, up to 168 mm length
NOTE:
 Slot #1 is only available in a dual processor configuration.
4x DIMM Slots
CPU 2
4x DIMM Slots
PCIe
Slot
PSU 2
1x DIMM
Slot1
CPU 1
4x DIMM Slots
4x DIMM Slots
Slot2
Slot3
Slot4
Slot5
2.5-inch
Hot Plug
Drive Cage
8x 2.5
-inch
Drives
8x 2.5
-inch
Drives
Optical Drive Bay
Media Bay
Optical Driver
Bay /
Media Bay
Redundant Cooling Fan
Cooling Fan
2.5-inch
Hot Plug
Drive Cage
Hot Plug
Power Supply 1/2
PSU 1
CHASSIS
FRONT
CHASSIS
INSIDE
CHASSIS
REAR
4x Flash Backup Unit Slots
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5