2
Before Operation
INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT.
Insert the batteries (two 1.5V, type AA)
MAINS CONNECTION
Plug the mains cable into the power socket with 240V, 50Hz AC.
AERIAL CONNECTION
When using an outdoor aerial, it is usually connected to the set by means
of 75 ohm.
SWITCHING ON AND OFF
Switching on
Switch the set on with the MAIN POWER button(POWER), and then
CH UP or DOWN button on the front of the set.
Or use the OPERATE button or the CH UP/DOWN button or one of
the NUMBER buttons on the remote control.
NOTE : When switching power on, full picture and sound shall
appear in 6-8 seconds. This is to ensure optimum picure
stabilisation.
Switching off
Press the OPERATE button( ), on the remote control to return the
set to its stand by mode.
If you don't use the set for an extended period of time, turn it off with
MAIN POWER button on the set.
To Next Page
Loading...
