NEC IP3NA-12TXH - About Cordless Terminals

1 - 2
About Cordless Terminals
A cordless terminal is a multifunctional terminal that interconnects its Bluetooth
®
terminal
and Bluetooth
®
handset with each other using Bluetooth
®
wireless technology to maintain
calls or perform other operations between them.
・The Bluetooth
®
terminal can be handled the same way as a telephone. Its Bluetooth
®
handset can be handled likewise, except for some of its features. If a particular feature of a
terminal does not work, use the Bluetooth
®
terminal to enable it.
・If the Bluetooth
®
handset is out of service, return it to the Bluetooth
®
terminal to keep it
charged at all times.
・Where multiple cordless terminals are set up, be careful to retain the pairing between the
Bluetooth
®
cradle and Bluetooth
®
handset.
The table below summarizes the key functions of a cordless terminal. For information about
the functions of the multifunctional telephone itself, refer to the manual that comes with your
system.
About Cordless Terminals
Bluetooth
®
Terminal and Bluetooth
®
Handset
Key Functions
The ways you originate calls from the Bluetooth
®
headset and answer
terminating calls may vary depending on the type of device you use.
Function Description
Bluetooth
®
Terminal
Bluetooth
®
headset call
You can register a Bluetooth
®
headset with the Bluetooth
®
cradle and use it.
• Originating calls to an extension or central office line
Press the headset call (call control) button twice briefly
and then dial on the terminal.
• Answering terminating calls
Press the headset call (call control) button while a call
terminates with a ring tone.
Caution