1 - 31
Transforming the Standard Handset into a IP3NA-BCH ADAPTER( )
6 Tilt the standard handset cradle stopper towards the cradle until it
is released with a click.
7 Slide the standard handset cradle farther away to remove.
8 Remove the cradle connecting cable from the terminal unit
connecter.
9 Insert the cradle connecting cable of the Bluetooth
®
cradle into the
terminal unit connecter.
10 Insert the lug on the terminal unit into the hole in the Bluetooth
®
cradle.
Have the cradle connecting cable passed in the groove to keep it from being pinched.
Multifunctional
terminal unit
Standard handset cradle
Unit connecter
Cradle connecting cable
Stopper
To Next Page
Loading...
