User Guide
11/3/2015 Page 7
Dialer Configuration
The dialer configuration parameters are normally the system parameters needed to register the MLC Client as
ISIP/NSIP Client. Parameters such as contain some of system parameters that registration parameters dare obtained
and defined Define the time format and Network Time server information
Account Name- Profile or account name
User Name: SIP user name assigned by the administrator after provisioning in the phone system.
Display Name: Name that is displayed in the application.
Password: This field must match with the information provisioned in the phone system.
Server: The IP address of the phone system and corresponding domain.
Enable Proxy: Check n switch if there is a proxy server serving the SIP agent like the Multiline Telephone application.
Proxy: Define the phone system URI and port number for SIP connectivity.
UC Server: Define the UC Server URI or IP address.
UC Server Username: Define the UC application user name.
UC Server Password: Define the UC application password.
To Next Page
Loading...
