E-127
SPECIFICATIONS
This section provides technical information about the LT260/LT240/LT220 Projector's
performance
Model Number LT260/LT240/LT220
Optical
DMD™ Single Chip Digital Micromirror Device(DMD™)
Resolution 1024⳯768 pixels (LT220: 800⳯600 pixels) up to UXGA
with Advanced AccuBlend
Lens Manual zoom and focus:
LT260/LT220: F2.2 - 2.5 f=28.4mm - 34.0mm
LT240: F2.5 - 2.8 f=22.4mm - 27.0mm
Lamp 220 W DC standard
(The lamp is warranted for 1500 hours of operation time
within 6 months.)
Image Size 30 inches - 500 inches (0.8 m - 12.7 m) diagonal
Projection Distance LT260: 3.8ft - 80.7ft / 1.18m - 24.6m
LT240: 2.95ft - 62.3ft / 0.90m - 19.0m
LT220: 4.0ft - 83.3ft / 1.22m - 25.4m
Projection Angle LT260/LT220: 14.7°-15.2°(wide) / 12.2°-12.4°(tele)
LT240: 18.6°-19.4°(wide) / 15.7°-16.2°(tele)
Electrical
Inputs 2 RGB, 1 S-Video, 1 Video, 1 PC Card, 1 Stereo Mini
Audio, 1 (L/R) RCA Audio, 1 PC Control
Outputs 1 RGB, 1 Stereo Mini Audio
USB Port 1 A Type, 1 B Type
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM,
HDTV:1080i, 720p, 480p, 480i (w/optional cable)
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 120 Hz
Video Bandwidth RGB: 100 MHz (-3dB)
Pixel Clock Freq Less than 135 MHz
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL / YCbCr: 540 TV lines
SECAM: 300 TV lines
RGB:
LT260/LT240: 1024 dots (H)⳯768 dots (V),
LT220: 800 dots (H)⳯600 dots (V)
To Next Page
Loading...
