4.Starting/Exiting the Software
Viewer PPT Converter 2.0
Start the Software
Preparation:
(1) Check that Microsoft PowerPoint has been installed. Viewer PPT Converter 2.0 cannot be
used unless PowerPoint has been installed.
(2) Install the software on the personal computer from the supplied CD-ROM. (Page 8)
The software cannot be started from the supplied CD-ROM.
From the [Start] menu click [Program] 씮 [NEC Projector User
Supportware] 씮 [Viewer PPT Converter 2.0].
Dynamic Image Utility 2.0 will start.
Reference
•A function equivalent to Viewer PPT Converter 2.0 can also be executed from the Dynamic Image
Utility 2.0 [Tools] 씮 [Converting PowerPoint file] menu.
•Viewer PPT Converter 2.0 can also be started from the Microsoft PowerPoint 2000/2002 [Tools]
씮[NEC Projector User Supportware] 씮 [Output Viewer] menu.
Display Help
Preparation:
Please start Viewer PPT Converter 2.0.
Click [Help].
The [Help] menu will appear.
Exit the Software
Click [Exit].
Viewer PPT Converter 2.0 will close.
11
To Next Page
Loading...
